Managing Maps
73
FS6300 NMS Administrator’s Reference Guide
4 • Configuring Maps
To identify overlapping maps:
1.
Select
Overlap Maps
from the Miscellaneous Maps window.
2.
The table will display all of the overlapped maps. Select a row of an overlapped map, and click
Delete
Overlap
.
3.
Next, select the two rows that are highlighted green and click
Confirm Valid Intercard Map
. If the request
is processed successfully, the two identified maps are now assigned a new Inter-Card System ID, which is
updated in the database and also configured on the cards. The rows are cleared from the Overlapped Maps
table.
4.
The paired DS0 maps are now displayed in the View-Delete section under Inter-Card maps.
Managing Maps
In the NMS, you can create DS0 map connections on the same card, inter card, or inter chassis. Click on
Map
Provisioning > Create and Manage DS0 Maps
to bring up the DS0 Mapping window.
Creating Same Card Maps
To create maps on the same card:
1.
Click on
Same Card
(under Provision Maps) in the menu tree of the Map Provisioning window.
Figure 60. Same Card window
2.
Select a chassis from the
Select Chassis
drop-down menu. If the selected chassis is type
6U
, select the right
or left segment from the drop-down menu in the blue section at the top of the window.
3.
Select a card in the chassis from the
Select Card
drop-down menu.
4.
Choose the device type to use from the
Dev Type A
and
Dev Type B
drop-down menus. The available
options for device types will vary, depending on the card’s model.