Viewing Chassis Diagnostics
87
FS6300 NMS Administrator’s Reference Guide
4 • Configuring Maps
Figure 73. Chassis Diagnostics > Port Utilization tab
2.
Select the desired
Chassis
from the drop-down menu and click the
button to view configuration
details.
3.
Select a tab to view specific chassis information. The window highlights conflicts in each tab.
–
Same Card Maps:
This tab lists DS0 maps on the same card.
–
Inter Card Maps:
This tab lists DS0 maps between different cards in the same chassis.
–
End to End Maps:
This tab lists DS0 maps between different chassis.
–
Partial H110 Maps:
This tab lists DS0 maps that use H110 timeslots on the card but do not have cor-
responding maps on any other card in the chassis.
–
Overlap H110 Maps:
This tab lists multiple DS0 maps that use the same H110 timeslots. If there are a
large number of overlapped H110 DS0 maps, select any DS0 map from the top table (
Configurations)
to
view the maps that are conflicting with the H110 utilization in the bottom table (
Details
).
–
Reserved H110s:
This tab lists all of the reserved H110 timeslots on the chassis. Select a device to view
details of corresponding DS0 maps for each reserved H110 configuration and any conflicting configura-
tions (i.e. any DS0 map using these reserved H110 timeslots).
–
Trunks:
This tab lists all of the trunks on the chassis. Select a trunk to view if the trunk is used by any
map (other than end-to-end provisioning).
–
Cards:
This tab lists all of the cards and details for the selected chassis.
–
Port Utilization:
This tab shows the port and timeslot utilization for various DS0 maps.