Patton electronics ForeSight 6300 NMS Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 156

Patton electronics ForeSight 6300 NMS Скачать руководство пользователя страница 59

Re-Discovering Already Discovered Devices

59

FS6300 NMS Administrator’s Reference Guide

3 • Discovering Your Network

Re-Discovering Already Discovered Devices

By default, the rediscovery process discovers only devices that were not discovered previously. It does not redis-
cover the already discovered devices. To rediscover already discovered devices:

1.

Click on

Tools > Discovery Administration

at the top of the screen. Then, click on

Discover Patton

Devices

in the menu tree of the Discovery window.

2.

Click on the

General

tab, then select the checkbox for

Re-Discover Already Discovered.

By default, this

option is disabled.

Figure 46. Re-Discover Already Discovered

3.

Click

Apply

. This change will take place the next time the NMS goes through the re-discovery process.

(See

“Scheduling Rediscovery”

on page 60).

Re-Discovering Cards Manually

You should re-discover cards after changing a card’s configuration, or if you have added a new chassis or devices
to the network. To manually re-discover cards:

1.

Right-click on the device icon. You can do this in the Geographical Area, Network Node, Chassis, or Card
sections of Network Maps.

2.

Select

Re-Discover Cards

from the drop-down menu. A window displays with information about the

card(s), including IP address, netmask, and SNMP Agent port.

3.

Click

Re-Discover

. A message displays at the bottom of the box: “This action will take a few minutes.

Please watch the status message. Status: Re-discovering...”

Figure 47. Re-Discover Cards

«
...
57
58
59
60
61
...
»

Содержание ForeSight 6300 NMS





























































































































































Отзывы:

Нет отзывов