Introduction
75
Model 6081RC Network Access Server Getting Started Guide
9 • Operation and shutdown
Introduction
This chapter describes how to start up and power down the Model 6081RC.
Activating the Model 6081RC
The Model 6081RC is activated by completing the procedures in
Chapter 2, “Hardware installation”
and
Chapter 3, “Initial configuration of the Model 6081RC”
. To activate the 6081RC, please follow the procedures
in those chapters.
The Model 6081RC is designed for unattended operation. Once the Model 6081RC has been installed and
configured, no further operator action is required under normal conditions.
De-activating the Model 6081RC
Perform the following procedure to deactivate the Model 6081RC.
Note
Be sure to wear an anti-static strap to prevent electrostatic damage to
the blade.
1. Unlock the handles on the front of the 6081RC by pressing the red button on each handle. The button
immediately activates the switch (turning it to an open position), while the button itself remains
depressed. Remove the blade by pushing the handles outwards.
2. Remove the Model 6081RC from the rack chassis. Place the blade on an anti-static surface.
