Initial configuration through the RS-232 control port
33
Model 6081RC Network Access Server Getting Started Guide
3 • Initial configuration of the Model 6081RC
Figure 13. Connect To window
3. On the Connect To window (
figure 13
), set Connect using: to one of the options named Direct to ComX
(where the “X” refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click
OK
.
5. The COM1 Properties window displays.
6. Configure your COM port settings as shown in
figure 14
, then click
OK
.
Figure 14. COM1 Properties window
7. Click on the
File
menu, then select Properties.
