Configuring the 6081RC for bridging application
70
Model 6081RC Network Access Server Getting Started Guide
8 • Configuring for bridged
Configuring bridge group parameters
Now that the bridge group is created, do the following to configure the bridge group:
1. Click on the Bridge 2 group hyperlink under the ID column in the Bridges section of the Bridge Configura-
tion page (see
figure 48
on page 69) to display the Bridge 2 Configuration page (see
figure 49
).
Figure 49. Bridge 2 Configuration page
2. Type a short description for Bridge 2 in the Description text box (see
figure 49
). For this example, type
Location1&2
. Do not change the default values for Aging Time and Garbage Collection, and do not enable
the Spanning Tree options.
3. Click the
Submit
button to activate the configuration.
PPP channel configuration
The PPP channel configuration page is where you can assign bridge groups to H.110 channels, and define such
PPP link parameters as MRU, retry times, authentication, etc.
1. Click on the PPP link in the Configuration Menu pane (see
figure 17
on page 37) to display the PPP Con-
figuration page (see
figure 50
).
Figure 50. PPP Configuration page
