Introduction
31
Model 6081RC Network Access Server Getting Started Guide
3 • Initial configuration of the Model 6081RC
Introduction
This chapter contains the following procedures that describe configuring the Model 6081RC Network Access
Router for operation:
•
“Configuration prerequisites”
—lists the items you need to have on hand before configuring the
Model 6081RC.
•
“Initial configuration through the RS-232 control port”
on page 31—describes how to define the 6081RC’s
LAN IP address and netmask parameters.
•
“Using a browser to complete Model 6081RC configuration”
on page 36—describes how to define the
remaining basic configuration parameters in order to bring your Model 6081RC on-line.
Configuration prerequisites
You will need the following to configure the 6081RC Network Access Router:
•
A PC equipped with the following:
-
RS-232/V.24 serial port
-
VT-100 terminal program, e.g., HyperTerminal
-
Ethernet port
-
Web browser (e.g., Netscape Communicator or Microsoft Internet Explorer)
•
You will need the following information to configure the Model 6081RC:
-
The IP address and subnet mask for the 6081RC’s Ethernet port
-
The IP address of the default gateway
Initial configuration through the RS-232 control port
Initially you must configure the 6081RC’s IP address and—in rare instances—change the netmask from the
default settings.
Note
Do not connect to the Ethernet port on the Model 6081RC at
this time
.
Connecting the DB9-RJ45 adapter with the included cable
Do the following:
1. Find the DB9-RJ45 adapter for your PC and RJ-45-to-RJ45 cable shipped with your Model 6081RC.
2. Connect the DB9-RJ45 adapter to your PC’s RS-232 serial port.
