Configuring the 6081RC for bridging application
71
Model 6081RC Network Access Server Getting Started Guide
8 • Configuring for bridged
2. The PPP Configuration page lists the H.110 channel connections previously defined during H.110 chan-
nel configuration. Click the Channel 1 hyperlink to display the PPP Options: Channel 1 page (see
figure 51
).
Figure 51. PPP Options page
3. In the PPP Options section, select BCP (bridge control protocol) or IPCP (Internet protocol control proto-
col from the Mode menu. For this example, choose BCP.
4. Click to add a checkmark to the Enabled box.
5. In the BCP Options section, select the bridge group that the PPP channel will be attached to from the
Bridge Group menu. For this example, select Bridge 2
6. Click to add a checkmark to the Bridged box. Do not change the default settings for LCP, IP and IPCP
7. Click the
Submit
button to save changes.
8. Repeat steps 1 through 7 to configure channel 2 for PPP. The page will refresh and display the information
shown in
figure 52
.
At this point the 6081RC will start negotiating PPP/BCP connections with the remote CPE. The Status
window will turn yellow to indicate that negotiation is in progress.
Figure 52. PPP Status page
