Paton MultiPRO Series, Техническое описание и руководство по эксплуатации

Страница: 6 / 44

PATON MultiPRO series DC MMA/TIG/MIG/MAG
- 6 -
PARAMETERS MultiPRO-250 MultiPRO-250-400V
Rated voltage of 50Hz supply mains, V 220 3x400+N
Rated current consumption from the mains, A 32 … 36 10 … 12
Rated arc current, A 250 250
Maximum root‐mean‐square current, A 335 335
Load duration (LD)
70%/at 250А
100%/at 208A
70%/at 250А
100%/at 208A
Mains voltage variation range, V 160–260
±
20%
Arc current adjustment range, A 12–250 12–250
Arc voltage adjustment range, A 12–28 12–28
Stick electrode diameter, mm 1.6–6.0 1.6–6.0
Filler wire diameter, mm 0.6–1.2 0.6–1.2
Pulsed welding modes
MMA: 0.2...500Hz
TIG: 0.2...500Hz
MIG/MAG: 5...500Hz MMA: 0.2...500Hz
TIG: 0.2...500Hz
MIG/MAG: 5...500Hz
Non‐contact arc‐striking unit (high‐frequency injection unit) in
TIG mode
Yes Yes.
Hot Start in MMA mode adjustable adjustable
Arc Force in MMA mode adjustable adjustable
Anti‐Stick function in MMA mode automatic automatic
Open‐circuit voltage reduction unit on / off on / off
MMA open‐circuit voltage, V 12 / 75 12 / 75
Arc striking voltage, V 110 110
Rated power consumption, kVA 6.9 … 7.9 6.9 … 7.9
Maximum power consumption, kVA 11.0 11.0
Efficiency factor, % 90 90
Cooling forced forced
Operating temperature range –25 … +45ºС –25 … +45ºС
Overall dimensions, mm (length, width, height) 360 х 260 х 270 360 х 260 х 270
Weight, excluding coil and accessories, kg 10.7 10.8
Ingress protection class* IP21 IP21
*For this series machines, their frame protects them from the ingress of objects more than 5.5mm in
diameter, as well provides rain protection, so that water streaming vertically does not infringe the
machine operation
The recommended length of power welding cables during welding:
Cable length
(one way)
Maximum
current
Cross‐section
area
Cable grade
1…7m 160А at most 16mm
2
КГ 1х16
2…9m 200А at most 25mm
2
КГ 1х25
3…11m up to 250А 35mm
2
КГ 1х35
ATTENTION! The mains button on the back of the device is not power one, so when
you turn off the device, it does not completely de-energize all the internal
electronics. For this reason, after completing the welding work, disconnect the plug
from the mains, according to the safety requirements.