Paton MultiPRO Series, Техническое описание и руководство по эксплуатации

Страница: 25 / 44

- 25 -
PATON MultiPRO series DC MMA/TIG/MIG/MAG
5. SEMIAUTOMATIC METAL INERT/ACTIVE GAS WELDING
(MIG/MAG)
Attention!
In the most general case, carbon dioxide “СО
2
” is used as shielding gas
for welding of ferrous metals, and aluminium is welded only using inert gases, such
as argon “Ar” and sometimes expensive helium “He”. As an alternative option for
stainless and high‐alloy steels, mixtures with different ratios are often used, such
as “80%Ar+20%CO
2
”. Other gases can only be used upon approval of the
equipment manufacturer.
Attention! Since the machine is equipped with a standard torch slot KZ‐2 of EURO
type, the user can purchase a torch at his/her own discretion in the future.
Procedure for preparation to operation with
solid wire welding:
‐ install the source on the base of wire‐feeding machine, for better rigidity brace
the source and the base with a strap (through slit‐type apertures on the sides of
the source) and tighten the strap. The strap is bundled with the machine;
‐ connect the supply cable of the wire‐feeding machine to slot
17 on the rear
panel of the source;
‐ insert the “mass” cable into the source socket
B “–” ;
‐ connect the “mass” cable to the work piece;
‐ connect the power current plug
12 of the wire‐feeding machine of the source
socket А “+” ;
‐ connect and fasten against the stop the semiautomatic welding torch to socket
11 of the wire‐feeding machine;
‐ install a pressure reducer on the gas bottle with shielding gas “СО
2
” or
“Ar+CO
2
”;
‐ connect gas hose to the pressure reducer of the gas bottle and plug 16 on the
rear panel of the wire‐feeding machine;
‐ open the cock of the gas bottle and check it for tightness;
‐ connect the mains plug of the source to the supply mains;