Paton MultiPRO Series, Техническое описание и руководство по эксплуатации

Страница: 37 / 44

- 37 -
PATON MultiPRO series DC MMA/TIG/MIG/MAG
In order to ensure trouble‐free operation! The output voltage of the generator
shall not fall beyond the permissible range of 160~260V; these are permitted
values for each phase, if a three‐phase machine is used.
10. STORAGE RULES
A preserved and packaged source shall be stored in storage conditions 4 as per
GOST 15150‐69 for 5 years.
A de‐preserved source shall be stored in dry closed rooms at air temperature
not lower than plus 5°С. The rooms must be free from acid vapours and other
active substances.
11. TRANSPORTATION
A packaged source can be transported by any mode of transport, which
provides its integrity, complying with all transportation rules established for this
mode of transport.
12. TECHNICAL SPECIFICATIONS
Attention! If a source is designed for special supply voltage, its technical
specifications are provided on the identification plate on the rear panel. In this
case, mains plug and mains cable shall be selected according to the voltage used.
Rated voltage of mains 50/60Hz
~220V
~3x400+N
Efficiency ratio (at rated current) 90%
Arc current adjustment range
10–200А
12–250А
Arc current at:
5min / 70% LD
5min / 100% LD
200А / 250А
167А / 208А
Maximum power consumption
8.0kVA
11.0kVA
Normal operating voltage:
- manual metal arc welding with an electrode (MMA)
- tungsten arc inert gas welding with an electrode (TIG)
- semiautomatic welding with wire (MAG/MIG)
21–28V
10–18V
12–28V