PASI Polares 32, Руководство пользователя

Страница: 60 / 62

POLARES 32 55
Errore. Per applicare Heading 1 al testo da visualizzare in questo punto, utilizzare la scheda
Home.
Logical - Physical electrodes mapping
Logical_id Mux_id Electrodes_id X_position Y_position
Z_position
1 1 1 0.00 0.00 0.00
2 1 2 5.00 0.00 0.00
3 1 3 10.00 0.00 0.00
4 1 4 15.00 0.00 0.00
5 1 5 20.00 0.00 0.00
6 1 6 25.00 0.00 0.00
7 1 7 30.00 0.00 0.00
8 1 8 35.00 0.00 0.00
Measurements table
The structure of the measurements table is as follows.
•
“Measures_list”: indicates the total number of measurements in the table, both
measurements performed and those to be performed. It is an integer value.
•
A table header line indicating for each column of the table which data is reported
and with which unit of measurement, contains the string “# A B M
N R=dV/I[Ohm] Rho[Ohm/m] Sigma[%] dV[V] I[A] SP[V] IP[ms]
K Time Longitude Latitude Altitude Frequency”.
• A sequence of lines (equal in number to the value in “Measures_list”) of values
written in string form, one line for each measurement to be performed or performed,
where data relating to the measurement and the measured values are shown. Values that
are not defined because they are absent or because the measurement has not been
performed will be populated with the string “-”.
The table header values are shown below and the formats for each related field in the
table are described.
•
“#”: the field contains a progressive integer number identifying the line and
therefore the measurement.
•
“A”, “B”, “M”, “N”: the fields show the logical identifier of the four electrodes
which, in the given measurement, assume each of the roles. The identifier “0” is used to
indicate that no electrode is associated with the measurement in that role. Values are
strings of integer numbers.