POLARES 32
31
Errore. Per applicare Heading 1 al testo da visualizzare in questo punto, utilizzare la scheda
Home.
Electrical parameters
The fourth template display page shows the electrical parameters that will be used when
performing measurements. These parameters can be configured by the operator.
The visible and configurable parameters on the page are listed below.
•
“Max. sigma [%]”: defines the mean square deviation value as a percentage of the
measurement value, at which point the system will assume that the value obtained is
precise enough and will not perform any further repetitions of the measurement.
•
“Max. attempts”: defines the maximum number of cycles to be performed for a
measurement; when this number of cycles is reached the measurement will still be
terminated, even if the Max. sigma value has not been reached.
•
“Frequency”: value used for performing the measurement.
F
IGURE
17:
E
LECTRICAL PARAMETERS FOR A TEMPLATE
.
Содержание Polares 32
Страница 5: ...6 GPD file format 49 General structure 49 File header 50 Electrodes table 54 Measurements table 55...
Страница 6: ......
Страница 17: ...12 FIGURE 2 INTERNAL MPXS TEST 1 A AND 1 B FIGURE 3 EXTERNAL MPXS TEST 2 3 N...
Страница 23: ...18 FIGURE 11 SYSTEM COMPLETE WITH 48 ELECTRODES WITH 1 EXTERNAL MPX...
