Wireless Smart Gate
Software Setup
8
013-16123A
Bluetooth and Battery
LED Information
The Bluetooth LED (light-emitting diode) and the battery LED operate as follows:
Indicator LED Information
The Indicator LED on the top of the Wireless Smart Gate shines when the sensor is on and connected to the
software and an object blocks the infrared beam entering Port 1 or Port 2. The Indicator LED also shines when
a Photogate or a Time-of-Flight Apparatus is attached to the Auxiliary Port (Port 3) and the photogate beam is
blocked or a projectile hits the Time-of-Flight pad.
Laser Detector Port (Port 4) is a special case. The sensor must be on and Port 4 must be selected in the
PASCO Capstone data collection software. If a laser beam shines into Port 4, and the laser beam is blocked,
the Indicator LED shines red. If the laser beam is unblocked, the Indicator LED is clear.
Bluetooth LED
Status
Battery LED
Status
Red blink
Ready to pair
Red blink
Low power
Green blink
Connected
Port
Status
LED Color
Status
LED Color
1
Blocked
Amber
Unblocked
Clear
2
Blocked
Green
Unblocked
Clear
1 & 2
Blocked
Red
Unblocked
Clear
3
Blocked
Red
Unblocked
Clear