Wireless Smart Gate
Appendix B: UK Timing Modes in SPARKvue
34
013-16123A
By default, the Assign SmartGate
window shows the four UK Timing
Modes menu choices:
•
One Light Gate and Single
Interrupt Card
•
Two Light Gates and Single
Interrupt Card
•
One Light Gate and Double
Interrupt Card
•
Two Light Gates and Double
Interrupt Card.
In addition, the Assign SmartGate
window shows the Smart Gate Only,
Smart Gate and Auxiliary Port, and
Auxiliary Port Only menu titles.
1. UK Timing Modes - One Light
Gate and Single Interrupt Card
•
Click or touch “One Light Gate
and Single Interrupt Card” to
select that menu choice. Click
or touch “OK” to activate that menu choice and close the panel.
•
The “Edit Timer Properties:”
window is revealed.The default
choices are “Time” and
“Speed/Velocity”. By default,
“acceleration” is disabled for
this timing mode. The default
“Length of Card” is 0.025 m.
•
Carefully measure the length of
the card you are using. If the
Length of Card needs to be
changed, highlight the default
value and enter your value.
•
Click or touch “Done” to accept
your value and close the panel.
•
The “Select Measurements for
Templates” window appears.
The measurement choices are
“Speed at A” and “Time in Gate
A” with “Speed at A” as the
default choice.
Record and Display Data In
SPARKvue
1.
Select a Display Template such as “Graph”, Digits” or “Table and Graph” from the Templates panel.
Click or touch to select
Default value - Change
value if needed