Wireless Smart Gate
Appendix C: UK Timing Modes in PASCO Capstone
36
013-16123A
Appendix C: UK Timing
Modes in PASCO Capstone
1.
In addition to the
previously
described Smart
Gate Timing
Modes, PASCO
Capstone also
supports the UK
Timing Modes
available in
English only. To
access the UK
Timing Modes,
click or touch the
File menu.
Select “Prefer-
ences” from the
menu.
1.
In the Properties
panel that opens,
select “Language”. English is the default language
choice. Below the Language menu is “Enable UK
Timing Modes”. Add a checkmark to the box. Click
“OK” to close the window and return to the main
workbook menu.
Connect the Sensor
Wirelessly in PASCO
Capstone
1.
Turn on the sensor and start the software. In the
PASCO Capstone Tools palette, click the “Hard-
ware Setup” icon to open the Hardware Setup
panel.
•
If no device is connected, the panel says
“Searching for wireless devices…”. and, below
that, “Please connect to an interface or wireless
device.” The panel shows the “Available Wireless
Devices”.
2.
Under “Available Wireless Devices,” click the
sensor that matches the XXX-XXX Device ID
number that is on one side of the Wireless Smart
Gate.
•
A “Connecting to the sensor” message appears
briefly.
•
The Hardware Setup panel changes to show the
image of the Wireless Smart Gate including Port 3,
the Auxiliary Port. and Port 4, the Laser Detector
Port.
•
The default setup choice is “Smart Gate (Single
Flag)”.
Click to select the
sensor
Device ID
Port 3, the
Auxiliary Port
Port 4, the Laser
Detector Port