PS-3225
Assign SmartGate- Auxiliary Port Only
19
013-16123A
1. Auxiliary Port Only - Free Fall Adapter
1.
Connect the plug from the PASCO Free Fall Adapter to Port 3, the Auxiliary Port on the Wireless Smart Gate.
The Free Fall Adapter is designed to hold a metal ball at a height above the “receptor pad”. When the ball is
released, timing begins, When the ball hits the pad, timing stops. Use the instructions that come with the Free
Fall Adapter to set it up for measurement
.
2.
Click or touch “Free Fall Adapter”
and then click or touch “OK” to
accept the choice and close the
dialog. The “Edit Timer
Properties” panel opens.The
“Height Of Fall” default value is 1
m.
3.
After you set up the Free Fall
Adapter, carefully measure the distance from the bottom of the ball to the top of the receptor pad. Highlight the
default value in the “Edit Timer Properties:” panel and enter your actual value. Click or touch “OK” to accept the
change and close the dialog.
•
The “Select Measurements for Templates” panel is revealed.
•
The panel shows “Time Of Fall” and
“acceleration,” with “Time Of Fall” as the default
choice. This measurement gives the time for the
ball to fall and “acceleration” is calculated based
on the “Time of Fall” and the “Height Of Fall”.
Auxiliary Port Only Timer Choice
Click or Touch
Click or Touch
ME-9207B Free Fall Adapter
Default value -
Change to your measured value
2
2
1
y
gt
2
2y g
t