Wireless Smart Gate
Assign SmartGate- Smart Gate and Auxiliary Port
14
013-16123A
•
The panel shows “Logic State”
as the only choice. The “Logic
State” is “0.00” if the gate is
unblocked and “1.00” if the gate
is blocked. The example Table
shows that this measurement
records the Logic State
(unblocked or blocked) and the
time when the Logic State
happened.
8. General Counting
•
This option assumes that a flag
or object will be passed through
the beam between Emitter Port
1 and Detector Port 1.
1.
Click or touch “General Count-
ing” to select it and then click or touch “OK” to accept the choice and close the dialog.
•
The Edit Timer Properties:” panel shows the default “Count Time Interval” is 1 (one) second (s).
2.
However, if you are using a
different amount of time for
counting, highlight the default
value in the “Edit Timer
Properties:” panel and enter the
actual value.
3.
Click or touch “OK” to accept the
change and close the dialog.
•
The “Select Measurements for Templates” panel
is revealed. The panel shows “Pulse Count” as
the default choice. This measurement gives the
number of times per “Count Time Interval” that
the Wireless Smart Gate beam for Detector Port
1 was blocked.
Assign SmartGate- Smart Gate and Auxiliary Port
1. Smart Gate and Auxiliary Port - Time of Flight Example
•
The second choice for Assign Smart Gate Is “Smart
Gate and Auxiliary Port”.
•
In the Hardware Setup section, see Mounting the
Wireless Smart Gate on a PASCO Projectile
Launcher.
1.
Connect a Time-of-Flight Accessory Pad
(ME-6810A) to Port 3, the Auxiliary Port on the Wire-
less Smart Gate.
Default Flag Length-
Change if necessary.
Default Time Interval-
Change if necessary.
Smart Gate
Time-of-Flight
Accessory Pad