Wireless Smart Gate
Assign SmartGate- Auxiliary Port Only
18
013-16123A
1.
Click or touch “Photogate Timing
(Two Photogates)” to select it and
then click or touch “OK” to accept
the change and close the dialog.
The “Edit Timer Properties” panel
is revealed. The “Flag Length”
default value may need to be
changed.
2.
Measure the length of the “flag”
on the Picket Fence you are
using. Highlight the default value in the “Edit Timer Properties:” panel and enter the actual value.
3.
Also, the “Photogate Spacing” default value may need to be changed. Measure the distance separating the
Wireless Smart Gate and the second photogate. Highlight the default value in the “Edit Timer Properties:”
panel and enter the actual value. Click or touch “OK” to accept the change and close the dialog. The “Select
Measurements for Templates” panel is revealed.
•
The panel shows seven measurements with
“Time In Gate
1
” as the default choice. This
measurement gives the time that the flag of the
picket fence blocked Detector Port 1.
•
“Velocity In Gate
1
” is the velocity of the cart
based on the flag length and the time that
Detector Port 1 was blocked.
•
The “Time in Gate2” and “Velocity in Gate2” are
based on the flag length and the time that the
flag blocked the second photogate.
•
The “Time Between Gates”, “Velocity Between
Gates”, and “Acceleration Between Gates” all depend on the Photogate Spacing distance and the time
between when the Wireless Smart Gate was blocked and the second photogate was blocked
Assign SmartGate- Auxiliary Port Only
The third choice for “Assign Smart
Gate” is
•
”Auxiliary Port Only”
Auxiliary Port Only
Click or touch the menu arrow for
“Auxiliary Port Only” to show the
choice (Free Fall Adapter).
Go to www.pasco.com to see the
description of the ME-9207B Free
Fall Adapter.
Default value -
Change value if needed
Default value -
Change value if needed
Click or Touch the Menu arrow
Assign SmartGate Choices