38
function setting key
for more
than half a second (shorter than
2
seconds)to
confirm
the
selection, then to set the minus
range
⑥ To set the minus range in the
same way.
⑦ After the minus range is
confirmed. Long press function
setting key
for more than 2
seconds to exit setting menu.
Bypass
function
setting(2)
Enter the setting interface. Press
and hold the function setting key
for more than 2 seconds, then
come to setting interface ,short
press the scroll key
for more
than half a second (less than 2
seconds) to select BPS setting, the
letters “bPS” will flash.
② Enter the BPS setting interface.
Press and hold the function setting
key
for more than half a
second(less than 2 seconds) at this
time, the letters “bPS” will stop
flashing. The “ON”(or OFF) below
the bPS will flash. Press and hold the
scroll key
for more than half a
second (less than 2 seconds) to
determine whether the BPS function
is enabled or disabled.
③
Confirm the BPS selecting
interface. After selecting ON or
OFF, press and hold the function
setting key
for more than
half a second (less than 2
seconds). Now, the BPS setting
function is completed and the
“ON” or “OFF” below the
“bPS” will light without
