39
flashing.
④ If you choose “OFF”, then go to
step 7, otherwise go ahead to step 5.
⑤ Set the BPS tolerance range.
Short
press
the
scroll
key
or
for more than half a
second (shorter than 2 seconds)
to select the voltage range in
percentage.
+5%,+10%,+15%,+25% (default
is +25%), then short press
function setting key
for more
than half a second (shorter than
2
seconds)to
confirm
the
selection, then to set the minus
range
⑥ To set the minus range in the
same way.
⑦ After the minus range is
confirmed. Long press function
setting key
for more than 2
seconds to exit setting menu.
Output
voltage
setting(3)
① Enter the setting interface. Press
and hold the function setting key
for more than 2 seconds,
then come to setting interface,
Press and hold the scroll key
for more than half a second(less
than 2 seconds), select the
function setting, choose output
voltage setting interface, at the
moment, the letters “OPU” will
flash.
② Enter
the
output
voltage
selecting interface. Press and
hold the function setting key
for more than half a second(less
than 2 seconds), then come to
setting interface of output
