Partner Tech International PT-5700, Руководство по обслуживанию, Страница: 56 / 88

48 Locating the Problem
Cash drawer checkout
Refer to the following to check for a cash drawer problem.
1
Remove the rear cover. (See “Removing the rear cover” on page 5.)
2
Connect the RJ-11 cable from the cash drawer to the RJ-11 connector on the PT-5700 as shown in Figure 4.1.
Figure 4.1 Connecting a cash drawer
3
Turn on the PT-5700.
Refer to the following to prevent incorrect cash drawer status detection by the system:
IMPORTANT
The cash drawer RJ-11 connector is DC+24V. Ensure the cash drawer to be con-
nected matches this power specification.
P
ORT
I/O
PORT ADDRESS
B
IT
C
ONDITION
N
OTE
Control port 404dh 7
High (1) -> Close
Low (0) -> Open
If bit7 is set to Low to open the
cash drawer, after it must be set
back to High to prevent the sys-
tem as always detecting the
drawer as open.
Status port 404ah 4
High (1) -> Close
Low (0) -> Open
Cashdrawer