Partner Tech International PT-5700 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 88

Partner Tech International PT-5700 Скачать руководство пользователя страница 37

Power Management Setup Option

29

PNP OS Installed

Setting this option to Yes allows the PnP OS (instead of BIOS) to assign the system resources such as IRQ and I/O
address to the ISA PnP device. The default setting is No.

Reset Configuration Data

If you enable this item and restart the system, any PnP configuration data stored in the BIOS Setup is cleared from
memory. The default setting is Disabled.

Resources Controlled By

You should leave this item at the default Auto (ESCD). Under this setting, the system dynamically allocates resources
to plug and play devices as they are required. If you cannot get a legacy ISA (Industry Standard Architecture) expan-
sion card to work properly, you might be able to solve the problem by changing this item to Manual, and then opening
up the

IRQ Resources

sub-menu.

IRQ Resources

This menu can only be accessed when the

Resources Controlled by

menu is set to Manual.

In the

IRQ Resources

sub-menu, if you change any of the IRQ assignations to Legacy ISA, then that Interrupt Request

Line is reserved for a legacy ISA expansion card. Press <Esc> to close the IRQ Resources sub-menu.

PCI/VGA Palette Snoop (Enabled)

This item is designed to overcome some problems that can be caused by some non-standard VGA cards. This main-
board includes a built-in VGA system that does not require palette snooping so you must leave this item disabled. The
default setting is Enabled.

Assign IRQ For VGA/USB (Enabled)

Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on your system. Activity of the selected IRQ
always awakens the system. The default setting is Enabled.

Press <Esc> to return to the main menu.

«
...
35
36
37
38
39
...
»

Содержание PT-5700

























































































Отзывы:

Нет отзывов