PARAMOUNT BED KA-8251 Скачать руководство пользователя страница 38

Страница: 38 / 48

TROUBLESHOOTING

Status

(symptom)

POWER lamp

on handheld

controller

Error code

on handheld

controller

Check

Corrective action

Reference

page

The recliner
does not
move when
the operation
buttons are
pressed.

Constant fast

flashing in

red (every

0.2 seconds)

H1 to H9

Unplug the power plug from the outlet and
check that the POWER lamp on the handheld
controller goes out, then plug the power plug
back into the outlet.

–

A section that

is different from

the operated
corresponding
button moves.

Green lights

–

Did the leg rest (backrest) move
down when the button for raising
the backrest (raising the leg rest)
was pressed?

The angle limit function is working and this is
not a failure.

–

The correct
position cannot
be attained.

–

Is there any obstacle that is
interfering with the movable parts
of the recliner?

Remove any obstacles.

–

Unable to move
the recliner.

–

Are casters locked?

Unlock casters.

–

The wrench
mark is lit up
in the setting
mode.

–

Indicates it is time to replace the electrical
parts. For details, contact us (see “Contact
Information” on p. 46) or your distributor.

* When requesting repair or contacting us (see “Contact Information” on p. 46) or your distributor, please

provide the number on the product ID label (see p. 38).

Содержание KA-8251

















































Результаты поиска

Содержание KA-8251

Отзывы:

Похожие инструкции для KA-8251

Бренды по названию

Популярные бренды

PARAMOUNT BED KA-8251, Инструкция по эксплуатации

Результаты поиска

Содержание KA-8251

Отзывы:

Похожие инструкции для KA-8251

Бренды по названию

Популярные бренды