17
4
INSTALLATION
z
To avoid possible malfunctions, do not install the recliner in the following
locations.
z
z
Locations exposed to direct sunlight
z
z
Locations near heat sources such as a stove or heater
z
z
High-oxygen environment
z
z
Locations exposed to excessive amounts of water vapor or oil vapor
z
z
Location that tend to be exposed to high temperatures, high humidity, low temperatures or dry
conditions
Note: The optimum ambient conditions for the bed are as follows.
Temperature 14°F and 104°F (10°C and 40°C) / Humidity 30% RH to 75% RH / Air
pressure 800 hPa to 1060 hPa.
z
z
Locations with a large amount of dust, smoke, salt, sulfur, or corrosive substances
z
z
Locations with poor ventilation
z
z
Locations exposed to vibrations or shocks (including during transportation)
z
z
Locations where the floor is not strong enough
z
z
Locations where the floor is not level
CAUTION
z
z
Place the recliner in a location where the recliner does not hit the wall
or beam when you perform backrest-raising/lowering operation, leg
rest raising/lowering operation or height adjustment (3 Motor Type
only) operation with the backrest raised. The recliner or wall/beam may
be damaged or deformed.
