26
Setting the operation button lock (operation is disabled)
z
You can disable or enable the operation of each of the operation buttons for auto contour operation,
backrest, leg rest, and height.
* By factory default, all operation is enabled.
WARNING
z
z
Even if the operation of the buttons for operating the backrest, leg rest, and
height has been disabled, the backrest, leg rest, and height may be operated
by the AUTO CONTOUR OPERATION button. There is a risk of injury due to
unexpected movement of the recliner. If necessary, disable the operation of
the AUTO CONTOUR OPERATION button as well.
z
z
Once the settings have been changed, press the Set button again to confirm
the setting.
If you do not press the Set button, the changed setting will not be set.
z
z
Note that even when the operation buttons have been locked (operation is
disabled), pressing the reset switch returns all locked (disabled) operations to
the default state (operation enabled state) (see p. 28).
1
Switch to the setting mode by pressing the Set
button at the back of the handheld controller (see p.
25).
2
Press the DOWN button (AUTO CONTOUR
OPERATION) once.
* The operation selection lamp of a locked (operation
is disabled) operation button is turned OFF, and
the operation selection lamp of unlocked operation
buttons flashes.
3
Press
or
once for the operation button
for which the operation is to be disabled or the
disabled setting is to be canceled.
4
Press the DOWN button (AUTO CONTOUR
OPERATION) one more time.
* The operation selection lamp turns OFF, completing
the setting.
5
Confirm the setting by pressing the Set button at
the back of the handheld controller (see p. 25).
6
Make sure the operation selection lamp of the
operation buttons that have been locked (operation
is disabled) has turned OFF.
* If you press a disabled operation button,
is
displayed on the display panel.
6
Disabled operation display
24
246
Operation selection lamp
3
Operation buttons
