Foot end
Head end
Foot end
Foot end
Head end
Head end
23
6
USING THE RECLINER
Operation buttons and their actions
z
Pressing the operation button moves the recliner while the button is held down, and releasing
the operation button stops it at the corresponding position. Pressing two or more buttons at
the same time also stops the operation.
Note
!
z
z
If you stop the operation by pressing two or more buttons, remove your hands from all
buttons and then perform the operation again.
Backrest-raising / lowering
Leg rest-raising / lowering
z
z
The backrest section base can be adjusted from an
angle of -12° to 75°.
z
z
When lowering the backrest, the backrest stops
temporarily at the 0° position.
When the backrest lowering button is pressed again
after releasing, the backrest moves up to -12°.
z
z
The leg rest can be adjusted from an angle of -30°
to 12°.
z
z
The height from the floor to the seat face of the
recliner can be adjusted.
The seat face height can be adjusted in a range
between 45 cm and 76 cm.
z
z
This operation can be performed using the foot
control switch.
Raising/Lowering
(3 motor type only)
-12° to 75°
-30° to 12°
Height from floor to the seat face
45 cm to 76 cm
Backrest lowering button
Backrest raising button
Leg rest raising button
Raising button
Leg rest lowering button
Lowering button
