Paradyne FrameSaver NP 100 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 159

Paradyne FrameSaver NP 100 Скачать руководство пользователя страница 19

1 Preface

1-8

NetPath 100 User’s Manual - Installation Guide

980-001-0210K

November

2000

•

Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.

Rev. 4.01.xx from Rev. 3.01.xx

•

Added - Tunneled option for WAN management PVC, including configuration
by DLCI DIP Switches.

•

Added - Message Segmentation support for management traffic and
configurable maximum message size (MTU).

•

Added - Asynchronous LMI support.

Download Notes

Downloading Revision 4.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:

•

Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.

•

Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.

Rev. 3.01.xx from Rev. 2.xx

•

Added - Loss Monitor Packets including: per PVC statistics collection and
threshold alarm.

•

Added - CIR traffic measurements including: per PVC statistics collection and
threshold alarm.

•

Added - Multi-Network Delay measurements including: per PVC statistics
collection and threshold alarm.

•

Added - Monitoring of additional Internet and manufacturer specific protocols.

•

Added - LMI protocol types: LMI (Rev 1) and Annex A (Q933).

•

Added - Traps: Login security violation, ISDN Backup and Demand.

•

Added - Backup occurrence indication to CSU Statistics.

•

Added - ISDN Option supports unbonded mode for single B-Channel
configuration.

•

Changed - Link Test Packet size to be user selectable.

Downloading Revision 3.01.xx software to a NetPath 100 unit running a prior version
should not affect the unit’s current configuration.

«
...
17
18
19
20
21
...
»

Содержание FrameSaver NP 100
































































































































































Отзывы:

Нет отзывов