Paradyne FrameSaver NP 100 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 159

Paradyne FrameSaver NP 100 Скачать руководство пользователя страница 17

1 Preface

1-6

NetPath 100 User’s Manual - Installation Guide

980-001-0210K

November

2000

•

Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.

•

Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.

Rev. 8.01.xx from Rev. 7.01.xx

•

Added - Dynamic IP Relearn function: WAN Mgmt IP address is relearned
each time the PVC returns to an active condition (always.)

•

Added - Event Log, which captures and logs Trap occurrences for SNMP
retrieval.

Download Notes

Downloading Revision 8.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:

•

Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.

•

Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.

Downloading Revision 8.01.xx software to a NetPath 100 unit currently running Rev.
4.01.xx or 3.01.xx software will have the following effect:

•

Protocol Monitoring configuration will revert back to defaults.

Downloading Revision 8.01.xx software to a NetPath 100 unit currently running Rev.
2.01.xx software will have the following effect:

•

PVCs that were included in the delay measurement list on the PVC
Performance Configuration screen will be deleted.

•

Protocol Monitoring configuration will revert back to defaults.

Rev. 7.01.xx from Rev. 6.01.xx

•

Added - ML-PPP option for ISDN BOD bundling (8 B-Channels.)

•

Added - ISDN BOD Traps for Primary and Secondary connections.

•

Added - Trace Diagnostic capability for BOD calls.

Download Notes

Downloading Revision 6.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-

«
...
15
16
17
18
19
...
»

Содержание FrameSaver NP 100
































































































































































Отзывы:

Нет отзывов