![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972123.webp)
[Super Dynamic(SD)]
Select “On” or “Off” to determine whether to turn on or off the Super Dynamic function. This function can be
applied to each preset position.
This is not available when “Image capture mode” is set to “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel
[16:9](60fps mode)”.
Refer to the description “Super Dynamic function” (
Page 110) about the super dynamic function.
•
On:
The Super Dynamic function will work.
•
Off:
The Super Dynamic function will not work.
•
Default:
Off
[Level]
Adjust the super dynamic (SD) level.
If you move the slider in the “+” direction, a subject with high contrast can be captured without over exposure
or under exposure.
If you move the slider in the “-” direction, the parts with medium brightness can be captured with rich gradation.
Click the [Reset] button to reset to the default setting.
•
Default:
28
[BLC/ HLC]
Select from the following. When “On” is selected for “Super Dynamic(SD)” or when “On” is selected for
“Intelligent Auto”, this setting is not available.
•
Back light compensation (BLC):
Activates the back light compensation (BLC) function.
•
High light compensation(HLC):
Activates the high light compensation (HLC) function. The high light
compensation function limits the over exposure of subjects caused bright light (such as light from headlights
of cars) at night.
•
Off:
Deactivates the back light compensation function and high light compensation function.
•
Default:
Off
[BLC level]
Adjust the BLC level.
If you move the slider in the “+” direction, the effect of back light compensation will increase.
If you move the slider in the “-” direction, the effect of back light compensation will decrease.
Click the [Reset] button to reset to the default setting.
•
Default:
16
[HLC level]
Adjust the high light compensation level.
If you move the slider in the “+” direction, the effect of high light compensation (HLC) will increase.
If you move the slider in the “-” direction, the effect of high light compensation (HLC) will decrease.
Click the [Reset] button to reset to the default setting.
•
Default:
16
[Mask area]
When mask area is set, the selected area is masked and you can adjust brightness.
When “On” is selected for “Super Dynamic(SD)”, this setting is not available.
Refer to Page 118 for information about how to configure the mask area.
[Zoom] buttons, [Focus] buttons, Control pad/buttons, [Brightness] buttons
Refer to Page 15 for descriptions of how to operate these buttons/pad.
[Set] button
Registers the preset positions.
Operating Instructions
123
2 Settings
Содержание WV-X6511N
