![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972169.webp)
2.
Adjust the “Audio detection level” with the slider bar so that it is lower than the volume level that you want
to detect.
3.
Adjust the “Mic input volume” on the [Audio] tab of the “Image/Audio” page as necessary. (
®
→
The settings and the actual audio detection status are displayed on the bottom of the screen. If the
volume level goes above the audio detection level, a red bar, which indicates that sound has been
detected, is displayed.
If further adjustments are required, repeat from step 2.
Note
•
Noise or other unwanted sound from the surrounding area may be mistakenly detected.
•
Only the volume of the sound determines whether sound is detected or not, the type of sound does
not matter.
2.7.8 Configuration of the settings relating to alarm notification
[Notification]
Click the [Notification] tab on the “Alarm” page. (
®
For menu display and how to operate, refer to page 47,
page 48)
The settings relating to Panasonic alarm protocol and HTTP alarm notification can be configured in this section.
Operating Instructions
169
2 Settings
Содержание WV-X6511N
