Panasonic WV-X6511N, Руководство по эксплуатации

Страница: 102 / 265

[Smart Coding] - [Smart Facial Coding]
Maintains high image quality in the areas of the image containing people's faces and moving objects, and
reduces the transmission data volume in other areas of the image.
•
Off: Does not use “AUTO VIQS” and “Smart Facial Coding”.
•
On(AUTO VIQS): Maintains high image quality in the areas of the image containing moving objects, and
reduces the transmission data volume in other areas of the image.
•
On(Smart Facial Coding): Maintains high image quality in the areas of the image containing people's
faces and moving objects, and reduces the transmission data volume in other areas of the image.
•
Default: Off
Note
•
This feature can only be used for “Stream(1)”.
•
When “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9](60fps mode)” is selected for “Image
capture mode”, this function is not available.
•
When using this function, “VIQS” of “Image/Position” will be disabled.
•
When the camera is used in environments of 40°C or higher, the effectiveness of the smart facial coding
will be reduced.
•
Depending on the object, a high image quality may be maintained even in areas that do not contain a
person's face.
•
When “On” is selected for “Stabilizer”, “Smart Facial Coding” is not available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 5 seconds) to refresh the displayed H.265 (or H.264) images from the
following.
If using under a network environment with frequent error occurrences, shorten the refresh interval for H.265
(or H.264) to diminish image distortions. However, the refresh interval may be longer than the set value.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s/ 2s/ 3s/ 4s/ 5s
•
Default: 1s
Note
•
When “On(Low)” is selected for “GOP control”, the refresh interval is set to Max. 8s.
•
When “On(Mid)” is selected for “GOP control”, the refresh interval is set to Max. 16s.
•
When “On(Advanced)” is selected for “GOP control”, the refresh interval is set to 60s.
[Transmission type]
Select the transmission type of H.265 (or H.264) images from the following.
•
Unicast port (AUTO): Up to 14 users can access a single camera concurrently. “Unicast port1(Image)”
and “Unicast port2(Audio)” will automatically be selected when transmitting images and audio from the
camera. When it is unnecessary to fix the port number for stream transmission such as when using in a
particular LAN environment, it is recommended to select “Unicast port (AUTO)”.
•
Unicast port (MANUAL): Up to 14 users can access a single camera concurrently. It is necessary to select
“Unicast port1(Image)” and “Unicast port2(Audio)” manually to transmit images and audio from the camera.
It is possible to fix the port number of the router used for stream transmission via the Internet by setting
“Unicast port (MANUAL)” (
®
page 180). Refer to the operating instructions of the router in use.
•
Multicast: Unlimited number of users can access a single camera concurrently. Complete the entry field
of “Multicast address”, “Multicast port” and “Multicast TTL/HOPLimit” when transmitting stream with
multicast. Refer to page 9 for further information about the maximum concurrent access number.
•
Default: Unicast port (AUTO)
[Unicast port1(Image)]
*1
Enter the unicast port number (used to transmit images from the camera).
•
Available port number: 1024 - 50000 (Only even numbers are available.)
•
Default:
102 Operating Instructions
2 Settings