Panasonic WV-X6511N Скачать руководство пользователя страница 44

Страница: 44 / 265

(FF) button

Each time this button is clicked, the playback speed will change. When the

button is clicked during fast

playback, playback speed will return to the normal playback speed.

Note

•

The maximum speed of the fast playback varies depending on the setting of “Bit rate” - “Stream
recording” of the SD memory card.

•

Recorded audio will not be played back during fast playback.

(5s backward) button

Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.

(5s forward) button

Each time this button is clicked, the recorded data goes forward by 5 seconds and starts playing.

(STOP) button

Playback will stop and the “Playback” window will turn to the “Live” page.

[Time & date]

Time and date when each log has been recorded will be displayed.

[Duration]

Displays the period of time that the data has been recorded on the SD memory card.

[Event]

The event type will be displayed.

•

MN/SC:

Log by “Manual/Schedule”

•

TRM1:

Alarm by alarm input to Terminal 1

•

TRM2:

Alarm by alarm input to Terminal 2

•

TRM3:

Alarm by alarm input to Terminal 3

•

VMD:

Alarm by VMD alarm

•

COM:

Alarm by command alarm

•

AT:

Alarm detected by auto track alarm

•

AUD:

Alarm by audio detection alarm

(Start) button

The selected image will be downloaded onto the PC.
Before downloading images, designate the destination directory in advance. (

page 93)

The message window will be displayed to ask if it is OK to start download when the

button is clicked. Click

the [OK] button.

Note

•

The image playing screen cannot be operated while downloading. Perform operations after the
downloading is completed.

•

When the [Cancel] button is clicked in the process of the download, the download will be canceled. In
this case, video data already downloaded before clicking the [Cancel] button will be saved on the PC.

•

Video data are saved in the files of approx. 20 MB. When the file size of video data is more than 20
MB, two or more files will be downloaded.

Operating Instructions

1 Operations

Содержание WV-X6511N










































































































































































































































































Результаты поиска

Содержание WV-X6511N

Отзывы:

Бренды по названию

Популярные бренды

Panasonic WV-X6511N, Руководство по эксплуатации

Результаты поиска

Содержание WV-X6511N

Отзывы:

Бренды по названию

Популярные бренды