![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972154.webp)
The settings related to the camera action on alarm can be configured in this section.
[Terminal alarm 1]
Select an action to be taken when a terminal alarm 1 is detected from the following.
This setting is available when “Terminal 1” is selected for “Alarm input(TRM1)” of the [Alarm] tab.
•
Off:
Does not take any action even when a terminal alarm 1 is detected.
•
1-256:
If a previously registered preset position is selected, when a terminal alarm 1 is detected, the camera
will move to that position.
•
Auto track:
When a terminal alarm 1 is detected, the camera will start the auto tracking.
•
Patrol 1:
When a terminal alarm 1 is detected, the camera will start the patrol.
* If “Patrol 1” is not registered, it is not displayed on the screen.
•
Default:
Off
[Terminal alarm 2]
Select an action to be taken when a terminal alarm 2 is detected from the following.
This setting is available when “Terminal 2” is selected for “Alarm input(TRM2)” of the [Alarm] tab.
•
Off:
Does not take any action even when a terminal alarm 2 is detected.
•
1-256:
If a previously registered preset position is selected, when a terminal alarm 2 is detected, the camera
will move to that position.
•
Auto track:
When a terminal alarm 2 is detected, the camera will start the auto tracking.
•
Patrol 2:
When a terminal alarm 2 is detected, the camera will start the patrol.
* If “Patrol 2” is not registered, it is not displayed on the screen.
•
Default:
Off
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
This setting is available when “Terminal 3” is selected for “Alarm input(TRM3)” of the [Alarm] tab.
•
Off:
Does not take any action even when a terminal alarm 3 is detected.
•
1-256:
If a previously registered preset position is selected, when a terminal alarm 3 is detected, the camera
will move to that position.
•
Auto track:
When a terminal alarm 3 is detected, the camera will start the auto tracking.
•
Patrol 3:
When a terminal alarm 3 is detected, the camera will start the patrol.
* If “Patrol 3” is not registered, it is not displayed on the screen.
•
Default:
Off
154
Operating Instructions
2 Settings
Содержание WV-X6511N
