Panasonic WV-X6511N, Руководство по эксплуатации

Страница: 155 / 265

[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
•
Off: Does not take any action even when a VMD alarm is detected.
•
1-256: If a previously registered preset position is selected, when a VMD alarm is detected, the camera
will move to that position.
•
Auto track: When a VMD alarm is detected, the camera will start the auto tracking.
•
Patrol 1: When a VMD alarm is detected, the camera will start the patrol.
* If “Patrol 1” is not registered, it is not displayed on the screen.
•
Default: Off
[Audio detection alarm]
Select an action to be taken when a sound alarm is detected from the following.
•
Off: Does not take any action even when a sound alarm is detected.
•
1-256: If a previously registered preset position is selected, when a sound alarm is detected, the camera
will move to that position.
•
Auto track: When a sound alarm is detected, the camera will start the auto tracking.
•
Patrol 1: When a sound alarm is detected, the camera will start the patrol.
* If “Patrol 1” is not registered, it is not displayed on the screen.
•
Default: Off
[Command alarm]
Select an action to be taken when a command alarm is detected from the following.
This setting is available when “On” is selected for “Command alarm”.
•
Off: Does not take any action even when a command alarm is detected.
•
1-256: If a previously registered preset position is selected, when a command alarm is detected, the camera
will move to that position.
•
Auto track: When a command alarm is detected, the camera will start the auto tracking.
•
Patrol 1: When a command alarm is detected, the camera will start the patrol.
* If “Patrol 1” is not registered, it is not displayed on the screen.
•
Preset per sender: By registering the sender’s address for the command alarm and the preset position
for that address, the camera will move to the preset position when an alarm is detected from the command
alarm.
Click “Preset per sender >>” to open a separate window for setting the preset positions per sender.
(
®
Page 156)
•
Default: Off
[Image compression rate upon alarm detection]
Click “Image compression rate upon alarm detection setup >>” to display the setup menu that can configure
the settings relating to image quality when an alarm occurs. The setup menu will be displayed in a newly opened
window. (
®
page 156)
[Alarm E-mail notification]
Click “E-mail server >>” to display the setup menu that can configure the settings relating to E-mail notification
when an alarm occurs. The setup menu will be displayed in a newly opened window. (
®
page 158)
[Alarm image FTP transmission]
Click “FTP setup >>” to display the setup menu that can configure the settings relating to FTP transmission
when an alarm occurs. The setup menu will be displayed in a newly opened window. (
®
page 159)
[Alarm image recording(SD memory card)]
Click “SD memory card setup >>” to display the setup menu that can configure the settings relating to recording
images on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly opened
window. (
®
page 160)
Operating Instructions 155
2 Settings