Panasonic WV-X6511N, Руководство по эксплуатации

Страница: 17 / 265

This indicator will be displayed when “Manual” or “Schedule” is selected for “Save trigger” on the setup
menu. (
®
page 78)
Main area
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for “Time display format”
and “Date/time display format”. (
®
page 71)
In addition, when being adjusted, the status of brightness (
®
Page 74), camera position (
®
Page 105),
and the preset ID (
®
Page 122) will be displayed as well as the characters configured for “Camera title on
screen” (
®
Page 73).
Click a desired point in the main area on the “Live” page that is to be the center of the angle of view. The
camera moves to adjust the position in order to set the clicked point as the center.
*3
When selecting an area in the main area by dragging the mouse, the selected area will be located at the
center of the main area. In this case, the zoom ratio will be adjusted automatically.
*3
A zoom operation can be performed using the mouse wheel.
When the main area of the “Live” page is right-clicked, “Auto track” starts for the clicked object. Depending
on the targeted object or its surroundings, “Auto track” may not perform normally.
Note
•
When the camera is operated by a user with a low access level, images displayed on the screen
may be changed temporarily. This does not affect operation of the camera.
•
Depending on the PC in use, screen tearing* may occur when the shooting scene drastically
changes due to the GDI restrictions of the OS.
*A phenomenon in which portions of the screen are displayed out of alignment.
*1
Only operable by users whose access level is “1. Administrator”.
*2 Only operable by users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User
auth.” (
®
page 174)
*3 As the tilt angle approaches 90°, because the difference between the specified position and the actual direction in which the camera
is moving increases, the camera may not move to the specified angle of view.
Operating Instructions 17
1 Operations