Overview
The EBDSPIR-AD PIR (passive infrared) presence detector
provides automatic control of lighting loads with optional
manual control.
Output Channel 1 comprises a mains voltage relay capable
of simple on/off switching, while Output Channel 2 provides
dimmable control of 1-10V ballasts.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight, or to implement a maintained
illuminance (daylight harvesting) system.
All functionality is fully programmable using an IR handset.
Features
Back features
Ceiling PIR presence detector – 1-10V dimming
EBDSPIR-AD, EBDSPIR-AD-IP
Product Guide
Retaining Spring
Retaining Spring
Power Input
& Switched
Output Connector
(Channel 1)
Dimmable
Control Output
Connector
(Channel 2)
Switch Input
Connector
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes
R
ed to indicate the following:
Power Input & Switched Output Connector
(Channel 1)
Used to connect mains power to the unit and to connect a
switched load.
Dimmable Control Output Connector
(Channel 2)
Used to connect 1-10V controllable ballasts and
transformers for dimmable loads.
Switch Input Connector
Two input terminals can be used to manually override the
dimming levels and override the lights on or off.
Walk Test LED active
when movement is detected
Valid setting received
Front features
Sensor Lens
which covers...
PIR Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel
EBDSPIR-AD-IP-LT30
A special order version that can be used down to -30ºC
