Panasonic WJ-ND300 Administrator Console, Инструкции по установке

Страница: 69 / 98

69
Perform the settings for the FTP server [FTP Setup]
Perform the settings for the FTP server.
Settings for transmitting images from a camera connected to this unit to a designated FTP server can be performed
with the FTP Setup menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click "FTP Setup". The "FTP Setup" window
will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Setup items
■
FTP Server Address
Enter an address or name (up to 255 characters) of the
FTP server that receives images. To enter an FTP serv-
er name, it is necessary to select "MANUAL" or "AUTO"
for "DNS". Enter up to 255 alphanumeric characters
including hyphens (-) and periods (.).
■
User Name
Enter a user name (login name) to access the FTP serv-
er. Enter up to 32 alphanumeric characters. The avail-
able characters are the characters listed below except
(&) and blank (space).
■
Password
It is necessary to register a password when sending
images to the FTP server. Enter up to 32 alphanumeric
characters on next page.
An entered character for the password will be displayed
as "*" or "•".
■
Mode
Select an action mode for sending images to the FTP
server. Change to "PASSIVE" when sending images is
difficult with "ACTIVE".
FTP Send by Periodic Timer
Perform the following settings to periodically send
recorded images. Perform the settings to determine
whether or not to send recorded images to the FTP
server using the timetable (page 55).
■
Server Directory
Enter a directory of the server. Enter up to 255 alphanu-
meric characters. The available characters are the char-
acters listed on the next page except (&*:<>?\ | ~ blank
(space)).