Panasonic WJ-ND300 Administrator Console, Инструкции по установке

Страница: 55 / 98

55
Set the time zone and assign programs [Time Table]
Create recording timetables for each day of the week, and assign a recording program to each timetable. Up to 6
recording programs can be created for each day of the week.
Screenshot 1
Click the [Schedule] button in the setup menu
(Advanced) and then click "Time Table" to display the
"Time Table" window.
Step 1
Click the button of the desired day of the week.
Note:
When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel (the external
recording mode changeover terminal (pin no. 24)) of
the unit will work with the set timetable for "EXT."
Screenshot 2
The timetable of the selected day of the week will be
displayed.
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 3
Click the [SET] button after completing the settings.
Screenshot 3
The "Time Table" window will be displayed again.
Step 4
The set timetables and programs will be applied.
Programs will be displayed with different colors.
Program1: Yellow
Program2: Green
Program3: Pale purple
Program4: Dark blue