35
■
Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server.
Select "ON" to obtain an IP address, a subnet mask and
a gateway address from the DHCP server. Set to "OFF"
when entering the addresses above manually.
ON:
Uses the DHCP server.
OFF:
Does not use the DHCP server.
[IP Address]
When "OFF" is selected for "DHCP", enter an IP
address. For this unit, enter 4 units from the decimal
numbers (0-254).
[Subnet Mask]
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
[Gateway]
Enter the IP address of the gateway according to the
network environment when "OFF" is selected for
"DHCP".
[Line Speed]
The following are available for "Line Speed".
AUTO:
Line speed will be applied automatically.
10-HALF:
10 Mbps semi duplex
10-FULL:
10 Mbps full duplex
100-HALF:
100 Mbps semi duplex
100-FULL:
100 Mbps full duplex
Note:
When the setup menu is closed after changing the
line speed, the unit will automatically restart.
Содержание WJ-ND300 Administrator Console
Страница 2: ...2 ...
