37
***{ if REDUNDANT:YES is selected by front panel
}
***{ switch.
}
***{ Format: AlarmPort=<port 1>,<port 2>
}
***{ port # = use "1" to indicate desired port (only one) }
***{ port # = use "0" to indicate ports not desired
}
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless
}
***{ System defaults are not acceptable. Delete the
}
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format
}
***{ Format: AlarmTextDisplay=<option>
}
***{ option 0 - Display Alarm Text only
}
***{ option 1 - Display both Alarm Text (20 chars)
}
***{ and Action Text (20 chars)
}
*AlarmTextDisplay=0
[SYSTEM]
***{ This section is optional. It is not required unless
}
***{ System defaults are not acceptable. Delete the
}
***{ single asterisks below to make this section active.
}
***{ Format: Keyboards=<num of controllers on this unit> }
***{ Cameras=<num of cameras on this unit>
}
***{ Monitors=<num of monitors on this unit>
}
*Keyboards=64
*Cameras=1024
*Monitors=256
[ROUTING]
***{ This section is optional to the system. It is only required for external gateway.
}
***{ Only one default gateway entry is allowed!
}
***{ Format: default=<gateway IPA>
}
default=192.168.200.1
*** Network entries must be grouped together although any number of entries is allowed. }
*** Format: network=<destination>,<gateway>,<netmask>
}
*network=64.0.0.0,192.168.200.44,255.0.0.0
*network=88.0.0.0,192.168.200.88,255.0.0.0
*network=33.5.0.0,192.168.200.66,255.0.0.0
*network=64.0.0.0,192.168.200.55,255.0.0.0
*** Host entries must be grouped together although any number of entries is allowed.
}
*** Format: host=<destination>,<gateway>
}
*host=33.44.55.66,192.168.200.66
*host=11.22.33.44,192.168.200.44
[SNTP]
***{ This section is optional. It is not required unless
}
***{ System defaults are not acceptable. Delete the
}
***{ single asterisks below to make this section active.
}
***{ This section lists user-defined client SNTP values,
}
***{ sync rates and an external server address.
}
***{
}
***{ Format: (VALUES INTERNAL TO THIS UNIT)
}
***{ ClientMode=<mode> (act as an SNTP client)
}
***{ modes: 0 - Internal (default)
}
