Panasonic Switch-M12PWR, Руководство по эксплуатации

Страница: 92 / 240

92
4.7.2.b. Trunk Configuration
On the Advanced Switch Configuration Menu, pressing "L" opens the Trunk
Configuration Menu screen, as shown in Fig. 4-7-8. In this screen, you can
configure trunking.
Fig. 4-7-8 Trunk Configuration
Screen Description
System
Priority System priority is an order of priority in this Switching Hub required for
constructing trunking on the network using LACP. Smaller number has
higher priority. The factory default setting is 1.
Key Indicates the group number of trunking.
Mode Indicates the operation mode of trunking.
Active
Sends out LACP packet from this Switching Hub and
constructs a trunk by negotiating with other side.
It is required that the other side mode is Active or
Passive.
Passive Does not send out LACP packet from this Switching
Hub and constructs a trunk by negotiating with other
side using LACP packet received from other side.
It is required that the other side mode is Active.
Manual Constructs trunking forcibly without using LACP
packet. It is required that the other side is the same
configuration as this side.
Members Port
List Indicates the port belonging to trunking group.
PN23129K/PN23129A Local Management System
Advanced Switch Configuration -> Trunk Configuration Menu
System Priority : 1
Key Mode Member Port List
----- -------- ---------------------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [A]dd Group Member Set P[o]rt Priority
[P]revious Page [R]emove Group Member LACP [G]roup Status
Se[t] System Priority [M]odify Group Mode [Q]uit to previous menu
Command>
Enter the character in square brackets to select option