Panasonic Switch-M12PWR, Руководство по эксплуатации

Страница: 222 / 240

222
Screen Description
Entry Displays the event number.
Time Displays the time when the event occurred, or the time accumulated after
boot if the clock is not set.
Event Displays the description of the event caused to the Switching Hub.
System Cold Start Indicates that this Switching Hub started.
Login from console Indicates a login from the console port.
Login from telnet,
xxx.xxx.xxx.xxx Indicates a login via Telnet.
Configuration changed Indicates that the configuration was changed.
Runtime code changes Indicates that the firmware was changed.
Configuration file upload Indicates that the configuration file was
transferred to the TFTP server.
Configuration file
download Indicates that the configuration file was
transferred from the TFTP server.
(Bridge)Topology Change Displays that the spanning tree topology was
changed.
Reboot: Normal Indicates that this Switching Hub rebooted.
Reboot: Factory Default Indicates that this Switching Hub rebooted to
return settings to factory default.
Reboot: Factory Default
Except IP Indicates that this Switching Hub rebooted to
return settings except the IP address to factory
default.
Not authorized! (IP:
xxx.xxx.xxx.xxx) Indicates that an unauthorized manager accessed
by SNMP.
SNTP first update to
yyyy/mm/dd hh:mm:ss Indicates that time data was obtained by
accessing the SNTP server.
Found other multicast
router. Stopped querier
function. Indicates that the function was stopped because
another IGMP querier exists.
Other multicast router is
expired. Restarted querier
function. Indicates that the function was restarted because
another IGMP querier no longer exists.
FAN status changed from
good to failed. Indicates that a fan problem occurred.
Temperature over
threshold. Indicates that the internal temperature exceeded
the threshold.
Temperature under
threshold. Indicates that the internal temperature decreased
below the threshold.
! Stus: xxxxxxxx IP: x Code:
x Add: xxxxxxxx
! Tsk: "xxxx" P:xxxxxxxxx
Pri: xx Indicates the system information when an
exception was raised.
Port- xx Link-up Indicates that the port was linked up.
Port-
xx
Link-down Indicates that the port was linked down.
Port-
xx
Power ON
notification
Indicates that the power supply to the target
port is turned on.
Port-
xx
Power OFF
notification
Indicates that the power supply to the target
port is turned off.