Chapter 3
Basic Operations
—
Operating with the remote control
ENGLISH - 9
3
Displaying internal test pattern
The projector has ten types of internal test patterns to check the condition of the projector. To display test patterns,
perfor
m
the follo
w
ing steps.
button
1) Press the <
测试模式
> button.
2) Press
qw
to select the test pattern.
Note
f
Test patterns can also be displayed using the
m
enu operation. Refer to “[TEST PATTERN]
m
enu
”
(
x
page
204)
for details.
f
Settings of position, size, and other factors
w
ill not be re
fl
ected in test patterns. Make sure to display the input signal before perfor
m
ing
v
arious adjust
m
ents.
Using the status function
Display the status of the projector.
button
1) Press the <
状态
> button.
f
The
[STATUS]
screen is displayed.
10000h
10000h
1/6
1.00 / 1.00
1.00
1h 23m
123456789012
菜单
EXIT
CHANGE
执行
E-MAIL/USB
SELF TEST
NO ERRORS
EXHAUST AIR TEMP.
NETWORK VERSION
INTAKE AIR TEMP.
MAIN/SUB VERSION
CONTINUOUS LIGHTING TIME
LIGHT RUNTIME
PROJECTOR RUNTIME
31°C/87°F
31°C/87°F
PROJECTOR TYPE
STATUS
PT-SRZ34KC
SERIAL NUMBER
Note
f
The projector status can also be displayed using the
m
enu operation. Refer to the [PROJE
C
TOR SETUP]
m
enu
→
[STATUS]
(
x
page
1
96
)
for details.
Setting ID number of the remote control
When you use the
m
ultiple projectors together, you can operate all the projectors si
m
ultaneously or each projector
indi
v
idually using a single re
m
ote control, if a unique ID nu
m
ber is assigned to each projector.
After setting the ID nu
m
ber of the projector, set sa
m
e ID nu
m
ber on the re
m
ote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID
全部
> button on the remote control. Also, you can control a projector by pressing the <ID
全部
> button on
the remote control even if you do not know the projector ID.
button
1) Press the <ID
设定
> button on the remote control.
2) Within five seconds, press and set the one-digit or two-digit ID number set on the projector body
using the number (<0> - <9>) buttons.
f
If you press the <ID
全部
> button, you can control the projectors regardless of the ID nu
m
ber setting of the
projector body.
