Panasonic PT-SRZ34KC, Руководство по эксплуатации, Страница: 179 / 322

Chapter 4 Settings
—
[PROJECTOR SETUP] menu
ENGLISH - 1 79
Setting [MAX LIGHT OUTPUT LEVEL]
Adjust the m axi m u m le v el to correct screen brightness according to the changes in brightness of the light source.
1) Press
as
to select [OPERATION SETTING].
2) Press the <
执行
> button.
f
The
[OPERATION SETTING]
screen is displayed.
3) Press
as
to select [MAX LIGHT OUTPUT LEVEL].
4) Press
qw
to adjust.
Operation Adjustment Range of adjustment
Press
w
.
Increases the m axi m u m le v el of brightness correction.
8. 0 % - 100 . 0 %
Press
q
. Decreases the m axi m u m le v el of brightness correction.
5) Press
as
to select [APPLY].
6) Press the <
执行
> button.
f
The con fi r m ation screen is displayed.
7) Press
qw
to select [OK], and press the <
执行
> button.
Note
f
[MA X LIGHT OUTPUT LEVEL] cannot be adjusted w hen [OPERATING MODE] is set to [NORMAL], [E C O], or [QUIET].
f
The brightness is corrected using this setting w hen the [PROJE C TOR SETUP] m enu → [BRIGHTNESS C ONTROL] → [BRIGHTNESS
C ONTROL SETUP] → [ C ONSTANT MODE] is set to [AUTO] or [P C ].
Setting [LIGHT OUTPUT]
Adjust the brightness of light source.
The [LIGHT OUTPUT] setting is synchronized
w ith the [PROJE C TOR SETUP] m enu → [LIGHT OUTPUT]. The
m ost recent setting is re fl ected in both ite m s.
1) Press
as
to select [OPERATION SETTING].
2) Press the <
执行
> button.
f
The [OPERATION SETTING] screen is displayed.
3) Press
as
to select [LIGHT OUTPUT].
4) Press
qw
to adjust.
Operation
Adjustment
Range of adjustment
Brightness Runtime
Press
w
. The screen beco m es brighter. The runti m e beco m es shorter.
8. 0 % - 100 . 0 %
* 1
Press
q
.
The screen beco m es darker. The runti m e beco m es longer.
* 1 The upper li m it of the adjust m ent range is the v alue set in the [PROJE C TOR SETUP] m enu → [OPERATION SETTING] → [MA X LIGHT
OUTPUT LEVEL].
5) Press
as
to select [APPLY].
6) Press the <
执行
> button.
f
The con fi r m ation screen is displayed.
7) Press
qw
to select [OK], and press the <
执行
> button.
Note
f
[LIGHT OUTPUT] can be adjusted indi v idually for each setting ite m of [OPERATING MODE].
f
The unifor m ity of the brightness bet w een m ultiple displays can be m aintained by adjusting [LIGHT OUTPUT] for each projector w hen
structuring a m ulti-display screen by co m bining the projected i m ages fro m m ultiple projectors.