Panasonic PT-SRZ34KC, Руководство по эксплуатации, Страница: 201 / 322

Chapter 4 Settings
—
[PROJECTOR SETUP] menu
ENGLISH - 201
2) Press the <
执行
> button.
f
The
[INFO MONITOR SETTING]
screen is displayed.
3) Press
as
to select [BRIGHTNESS].
4) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press
w
.
The infor m ation m onitor beco m es bright.
30 % - 100 %
( Factory default setting: 100 % )
Press
q
. The infor m ation m onitor beco m es dark.
Note
f
[BRIGHTNESS] is adjusted in incre m ents of 10 .
f
This can also be set w ith operation in the infor m ation m onitor. For details, refer to “Using the infor m ation m onitor function ” (
x
page 2 56 ) .
[DATA CLONING]
Perfor m the operation of the data cloning function. Data such as the settings and adjust m ent v alues of the
projector can be copied to m ultiple projectors v ia LAN or using the USB m e m ory.
For details of operation, refer to “Using the data cloning function ” (
x
page 2 66 ) .
[SAVE ALL USER DATA]
Sa v e the v arious setting v alues as a backup in the built-in m e m ory of the projector.
1) Press
as
to select [SAVE ALL USER DATA].
2) Press the <
执行
> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3) Enter a security password and press the <
执行
> button.
f
The con fi r m ation screen is displayed.
4) Press
qw
to select [OK], and press the <
执行
> button.
f
[PROGRESS] is displayed w hile sa v ing data.
Note
f
The data sa v ed by executing [SAVE ALL USER DATA] does not include the data set w ith “Geo m etric & Setup Manage m ent Soft w are ” .
f
The data sa v ed by executing [SAVE ALL USER DATA] is not deleted e v en if the [PROJE C TOR SETUP] m enu → [INITIALI Z E] → [FA C TORY
RESET] is executed.
[LOAD ALL USER DATA]
Load the v arious setting v alues sa v ed as a backup in the built-in m e m ory of the projector.
1) Press
as
to select [LOAD ALL USER DATA].
2) Press the <
执行
> button.
f
The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <
执行
> button.
f
The con fi r m ation screen is displayed.
4) Press
qw
to select [OK], and press the <
执行
> button.
Note
f
The projector enters the standby m ode to re fl ect the setting v alues w hen [LOAD ALL USER DATA] is executed.
f
The data loaded fro m [LOAD ALL USER DATA] does not include the data set w ith “Geo m etric & Setup Manage m ent Soft w are ” .
[INITIALIZE]
Return the v arious user data settings to the factory default settings.
1) Press
as
to select [INITIALIZE].
2) Press the <
执行
> button.
f
The [SECURITY PASSWORD] screen is displayed.