Panasonic PT-SRZ34KC, Руководство по эксплуатации

Страница: 82 / 322

Chapter 3 Basic Operations
—
Projecting
8 2 - ENGLISH
4) Check the focus at the center of the image again and make fine adjustments.
5) Tighten the lock screw.
f
Periphery focus adjust m ent ring is fi xed.
Note
f
When the projector is used for the fi rst ti m e or w hen the projection lens is replaced, con fi r m that the setting in the [PROJE C TOR SETUP]
m enu → [LENS] → [LENS TYPE] is appropriate, and then execute the [PROJE C TOR SETUP] m enu → [LENS] → [LENS C ALIBRATION].
f
The projected i m age size and scale sho w n on the periphery focus adjust m ent ring are an approxi m ate guide.
r
Fisheye Lens (Model No.: ET-D3LEF70C)
1) Adjust the focus at the center of projected image.
f
For the steps to adjust the focus, refer to “Adjusting the focus, zoo m , and lens shift ” (
x
page 79 ) .
2) Loosen the lock screw and turn the periphery focus adjustment ring by hand to adjust the focus in
the periphery of the screen.
Lock screw
Periphery focus adjustment ring
3) Check the focus at the center of the image again and make fine adjustments.
4) Tighten the lock screw.
f
Periphery focus adjust m ent ring is fi xed.
Note
f
When the projector is used for the fi rst ti m e or w hen the projection lens is replaced, con fi r m that the setting in the [PROJE C TOR SETUP]
m enu → [LENS] → [LENS TYPE] is appropriate, and then execute the [PROJE C TOR SETUP] m enu → [LENS] → [LENS C ALIBRATION].
f
The projection distance ( THROW.DISTAN C E ) displayed in the periphery focus adjust m ent ring is an approxi m ate guide.
Setting the lens type
When the projector is used for the fi rst ti m e or w hen the projection lens is replaced, con fi r m the [LENS TYPE]
setting. C hange the setting if the type is different fro m the projection lens attached to the projector.
1) Press the <
菜单
> button.
f
The [MAIN MENU] screen is displayed.
2) Press
as
to select [PROJECTOR SETUP].
3) Press the <
执行
> button.
f
The [PROJECTOR SETUP] screen is displayed.
4) Press
as
to select [LENS].
5) Press the <
执行
> button.
f
The [LENS] screen is displayed, allo w ing to con fi r m the current setting in [LENS TYPE].
f
To change the setting, proceed to Step
6)
.
6) Press
as
to select [LENS TYPE].
7) Press the <
执行
> button.
f
The [LENS TYPE] screen is displayed.