Panasonic PT-SRZ34KC, Руководство по эксплуатации

Страница: 123 / 322

Chapter 4 Settings
—
[ADVANCED MENU] menu
ENGLISH - 123
Note
f
[BLA C K LEVEL ADJUST] is a function that m akes the increased brightness in black le v el of the o v erlapping i m age area dif fi cult to
notice w hen [EDGE BLENDING] is used to structure a m ulti-display screen. The opti m al point of correction is set by adjusting [NON-
OVERLAPPED BLA C K LEVEL] so that the black le v el of the o v erlapping i m age area w ill be the sa m e le v el as the non-o v erlapping area. If
the border area of the part w here the i m age is o v erlapping and the non-o v erlapping part gets brighter after adjusting [NON-OVERLAPPED
BLA C K LEVEL], adjust the w idth or the shape of the top, botto m , left, or right. Adjust [BLA C K BORDER LEVEL] w hen the adjust m ent m akes
only the border area darker.
f
The joining part m ay look discontinuous depending on the position you are looking fro m w hen a screen w ith high gain or rear screen is used.
f
When con fi guring m ultiple screens using both horizontal and v ertical edge blending, adjust [OVERLAPPED BLA C K LEVEL] fi rst before
m aking adjust m ents in Step 14) . Adjust m ent m ethod is sa m e as the procedure of [NON-OVERLAPPED BLA C K LEVEL].
f
If only horizontal or v ertical edge blending is used, set all ite m s in [OVERLAPPED BLA C K LEVEL] to 0 .
f
The [AUTO TESTPATTERN] setting changes synchronizing w ith [AUTO TESTPATTERN] of [ C OLOR MAT C HING].
f
Adjust m ent of the shape of the border bet w een [NON-OVERLAPPED BLA C K LEVEL] and [BLA C K BORDER LEVEL] is a function to
perfor m the edge blending together w ith the adjust m ent of [GEOMETRY] (
x
page 113) . If [NON-OVERLAPPED BLA C K LEVEL] is
defor m ed by correcting the distortion of the projected i m age w ith [GEOMETRY], perfor m the adjust m ent follo w ing Step 19) to Step 27) , and
adjust the edge blending according to the shape of [NON-OVERLAPPED BLA C K LEVEL].
f
An error is accu m ulated by repeatedly adjusting the position of the adjust m ent points, w hich m ay distort the shape of the border a w k w ardly.
In such a case, initialize the shape of the border. Initializing the shape of the border w ill reset the shape to the factory default ( unadjusted
state ) . For details, refer to “Initializing the shape of the border ” (
x
page 123) .
Initializing the shape of the border
Initialize the data adjusted w ith [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], and
[RIGHT FREE SHAPE] and restore to the factory default settings ( unadjusted state ) .
1) Press
as
to select [EDGE BLENDING].
2) Press
qw
to select [ON] or [USER].
3) Press the <
执行
> button.
f
The [EDGE BLENDING] screen is displayed.
4) Press
as
to select [BLACK LEVEL ADJUST].
5) Press the <
执行
> button.
f
The
[BLACK LEVEL ADJUST]
screen is displayed.
6) Press
as
to select [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], or [RIGHT
FREE SHAPE] to initialize.
7) Press the <
执行
> button.
f
The [UPPER FREE SHAPE] screen, the [LOWER FREE SHAPE] screen, the [LEFT FREE SHAPE]
screen, or the [RIGHT FREE SHAPE] screen is displayed.
8) Press
as
to select [INITIALIZE].
9) Press the <
执行
> button.
f
The con fi r m ation screen is displayed.
10) Press
qw
to select [EXECUTE], and press the <
执行
> button.
Note
f
The adjust m ent data for [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], and [RIGHT FREE SHAPE] cannot be
initialized at once.
f
To initialize all the adjust m ent data, select each ite m and execute [INITIALI Z E] indi v idually.
f
When the projector is initialized by one of the follo w ing m ethods, all data in [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE
SHAPE], and [RIGHT FREE SHAPE] are initialized.
g
When initialized by selecting the [PROJE C TOR SETUP] m enu → [INITIALI Z E] → [FA C TORY RESET]
g
When initialized by setting the [PROJE C TOR SETUP] m enu → [INITIALI Z E] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALI Z E]
[FRAME RESPONSE]
Set the processing m ethod of the i m age fra m e delay.
1) Press
as
to select [FRAME RESPONSE].
2) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.