Chapter 3
Basic Operations
—
Switching on/off the projector
6
4
- ENGLISH
Switching on/off the projector
Connecting the power cord
C
on
fi
r
m
that the <
主电源
> s
w
itch is on the <
关
> side before connecting the supplied po
w
er cord.
For details of po
w
er cord handling, refer to “Read this
fi
rst
!”
(
x
page 5
)
. For the shape of the outlet, refer to
“Usable outlet
”
(
x
page
3
6
)
.
Attention
f
The <
电源接口
> ter
m
inal on the side of the projector and the connector of the supplied po
w
er cord are not hot s
w
apping co
m
patible. Make
sure to attach the po
w
er cord to the projector
fi
rst, and then connect the po
w
er plug to the outlet. When re
m
o
v
ing the po
w
er cord fro
m
the
projector,
m
ake sure to re
m
o
v
e the po
w
er plug fro
m
the outlet
fi
rst.
How to attach the power cord
Fig. 2
Fig. 1
1) Check the shapes of the <
电源接口
> terminal on the side of the projector and the power cord
connector, then insert the connector completely in the correct direction. (Fig. 1)
2) While inserting the power cord connector into the projector, turn clockwise until it clicks. (Fig. 2)
Attention
f
If you do not hear a “click
”
w
hen the po
w
er cord connector is turned clock
w
ise, the connector
m
ay be da
m
aged. Please stop using the
projector and consult your dealer.
How to remove the power cord
Fig. 1
Fig. 2
Lock lever
1) Confirm that the <
主电源
> switch on the side of the projector is on the <
关
> side, and remove the
power plug from the outlet.
2) Turn the power cord connector counterclockwise while sliding the lock lever forward (Fig. 1), and
remove the connector from the <
电源接口
> terminal on the projector (Fig. 2).
