Chapter 4
Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
[AUDIO IN 1]
Audio connected to the <AUDIO IN 1> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 2]
Audio connected to the <AUDIO IN 2> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 3]
Audio connected to the <AUDIO IN 3> terminal is output during projection of image from the set input
terminal.
[HDMI1 AUDIO IN]
*1
Audio input to HDMI1 is output.
[HDMI2 AUDIO IN]
*2
Audio input to HDMI2 is output.
[DIGITAL LINK AUDIO IN]
*3
Audio input to DIGITAL LINK is output.
[NETWORK/USB AUDIO IN]
*4
Outputs the audio of MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION.
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is DIGITAL LINK
*4 Only when the input signal is MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION
[FILTER COUNTER]
Check the runtime of the filter and set the cleaning/replacement cycle of the filter. Also, the runtime of the filter can
be reset.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
[FILTER COUNTER]
Displays the runtime of the filter.
[TIMER]
Sets the cleaning/replacement cycle of the filter.
[FILTER COUNTER RESET]
Resets the runtime of the filter.
Setting [TIMER]
If the filter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the filter reaches
the set time, a message prompting to clean/replace the filter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Select this item when a message is not to be displayed.
[1000 H] - [20000 H]
Select this item when a message is to be displayed. The cleaning/replacement cycle of the filter can
be set in 1 000 hour intervals.
Resetting [FILTER COUNTER]
Reset the runtime of the filter.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
3) Press
as
to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5)
The confirmation screen is displayed, so press
qw
to select [OK], and press the <ENTER> button.
f
Display of [FILTER COUNTER] will change to [0 H].
Содержание PT-MZ670
Страница 56: ...56 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with...
Страница 152: ...152 ENGLISH Chapter 5 Operations This chapter describes how to use each function...
Страница 208: ...208 ENGLISH Chapter 7 Appendix This chapter describes specifications and after sales service for the projector...